Atmel 89strabajos

The objective of this project is to develop a piece of client software (sample starter code provided) to work with out Atmel based hardware that communicates to a server via TCP/IP. Sample code is provided as a starting point for functionality, which included the complete framework and libraries needed to complete functionality of the project (which will be made available to download for the successful bidder). The sample code already does all of the key tasks specified in this project ( i.e. read card data, read the serial port, display images/movies etc) so developing the final project should be trouble free.

...one byte from card reader (9600,8,1,N) and should than send keyboard code to PC (actually two kodes, key pressed & released). PC should see the converter as usb HID device. Just 15..20 keycodes should be emulated. Protocol converter should be realized as micro controller code. Selection of micro controller type is not prescribed by us, although we would prefer Microchip device. However Cypress, Atmel, TI and NXP are also possible. Bidders should state their preference. It is possible to deliver code that is simulated and not real word checked, but we would prefer that bidder has it's own development environment. Card reader sends bytes to be emulated with big enough time margin so protocol converter has enough time after it receives one byte to generate usb telegrams w...

...One my clients is setting up a microcontroller lab for junior/high school students. So he is looking for someone who can help them create a workbook for this lab. Here is one of the many projects/tutorials that he needs for this workbook. What he wants is an Atmel microcontroller that can be used to interface an 8-bit I/O port to the 9-pin serial port on the PC. In other words, there will be a basic 8-bit Input port and an 8-bit Output port that would have to be interfaced to the serial port using some simple to understand ATMEL microcontroller. You will have to write a program in C# / VB .net that will run/control this interface. Also, you will be required to keep the circuit as simple and as affordable as possible. When your project is completed we will test it ...

We want to outsource part of a bigger project . This is based ATmel AT91SAMr64 chip. Here the product reads data from a PC and transfers it to Wi-Fi module through SDIO . The task at hand is to carryout the data read and convert that to WiFi using SDIO

I want to get PClint (I have a legal copy of it) to work with C code written for the WinAVR GCC compiler for the Atmel AVR microcontroller (Mega32). I am new to PCLint and it is a steep learning curve to get the configuration file right for WinAVR. At the moment I get all sorts of warnings about C++ macros etc and stuff unrelated to what I am doing I will provide a sample source code project and get a config file back from you that will work with it. I realise the dealing with the errors or warnings generated by PClint is a seperate issue, I just want to get PClint going and generating warnings. I have a PDF file that has some suggestions about how to use PClint in an embedded environment, I would like to follow those suggestions. I would also like to be able

I have an embedded AVR32 processor (ATMEL NGW100) running LINUX. I would like to cross compile a C++ program() that accesses Amazon's AWS services (). I am not that familiar with cross compiling to that environment.

this is an fpga project that will monitor and control a device in realtime using a php jquery website the MONITORING and CONTROL for the said device are not limited to rotations per minute voltage amperes wattage ohms temperature pressure flow all monitored and controlled by php software in realtime usb 2.0/3.0 or an ethernet port is to be used for IO ...project that will monitor and control a device in realtime using a php jquery website the MONITORING and CONTROL for the said device are not limited to rotations per minute voltage amperes wattage ohms temperature pressure flow all monitored and controlled by php software in realtime usb 2.0/3.0 or an ethernet port is to be used for IO any fpga can be used, xilinx, altera, atmel, or whatever ...

Hi Did find some intresting projet on the net that would be usefull for me. The project was to emulate a RFID tag with a Atmel ATtiny85. All the source code was on the site. Did get my self a AVRISP mk II programer and some chips tp start my project. But did soon find out that just loading the sofware to the chip was not the case... :-( The source was in some format not accepted in the AVRISP mk II programmer / software. So i need help to convert/rewrite the? source code and make all settings correct ? so that only need to program the chips. here is the link to the project: <> Br PM ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source

The project involves the development of code to be used in a product prototype. The main function of the code is to control LEDs and send information, via a serial connection, to a computer. Please see the following pages for further details. The code will be complied and transferred to an Atmel ATmega168 Microcontroller mounted on an Arduino Duemilanove board. The code will be transferred using the Arduino IDE software. Your knowledge of Wiring/C/C++ coding and the Arduino environment is required to realise this project in a very tight timeframe. There is scope for your creative input in order to make the code run smoothly and successfully.

...this program was not programmed only a small percent of chips would work). At the time the original designer had informed me that this software fix was not the best solution and I should put a hardware oscillator on the circuit. I took his recommendation and added a hardware oscillator but continued to run the process using the internal oscillator since it was not giving me any problems. But now Atmel the makers of the chip have released a new batch of the ATTINY2313 chips and now the circuit does not work, and they have informed me that is because the oscillator of the new ICs are not as accurate and hence need a hardware oscillator. So here is what I need to be done: I need a programmer to figure out what needs to be changed to activate the hardware oscillator. I know...

...progress), however I have used a 3rd party .dll to? communicate? with an Atmel? micro controller, and there is no mention of how these devices could be used under OSX that I could find on the internet. To complete the project I need a way of enumerating and? communicating? with an AT90USB128* type device.? The aim would be to recreate some of the functionality of the USB HID dll that Atmel ship with their 8 bit USB AVR micro controllers on an OSX environment. ## Deliverables At this point I am simply looking to see if there is anyone with the knowledge to take this on. I would expect anyone interested to be knowledge able with AVRs, and have worked with them before and thus already have the required hardware ie a Atmel dev board capable of taking the...

I am looking for a coder who has experience working with Atmel's ATMEGA microcontrollers. I would like to do the project in phases, starting off simple then adding complexity as we go along. First task would be to simply use one of the A/D inputs, apply some correction and output the ...simply use one of the A/D inputs, apply some correction and output the data to a DAC (MCP4921) using the SPI interface. Next phase would involve looking at a low frequency sine wave, finding the high and low and outputting the median value. Other phases of the project may involve some level shifting of the input signal, and implementation of PID control and LCD display. Bidders MUST have Atmel AVR experience and development boards. The budget will be by phases and will increase as compl...

I am looking for a coder who has experience with Atmel's Atmega microcontrollers. I would like to do the project in phases, starting off simple then adding complexity as we go along. First task would be to simply use one of the A/D inputs, apply some correction and output the info to a DAC (MCP4921) using the SPI interface. I can't get my hands on any of the Xmega parts so the additional DAC will be needed. Next phase would involve looking at a low frequency sine wave, finding the high and the low and outputting the median value. Other phases of the project may involve some level shifting and implementation of PID control and LCD display.

An unusual project this.. As a group of new media atists, we make very large sculptures, usually in public spaces. ...unusual project this.. As a group of new media atists, we make very large sculptures, usually in public spaces. A few years ago, a high profile client commissioned us to make a sculpture for them. Each element of the sculpture uses embedded Atmel (Atmega 8) processors to control motors and other feedback mechanisms. We need to update this code with some modifications, and then reflash each Atmel chip with the modifications. We have the original C code that was used, to make life easier. If you are interested in this, and have experience with Atmel chips and programming them, please let us know! We can supply everything thats needed to mak...

Development of a simple USB consumer device with display and a button **Hardware summary** 1. USB connector 2. Secure microcontroller 3. Button 4. Display of at least 3x32 chars (preferably more) The device should emulate a USB-drive (MSD), and be based around a secure microcontroller. **Individualization** After manufacture but b...Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform Secure microcontroller with USB and display driver. AES encryption. Currently looking at different alternatives (Atmel etc). Bidders may suggest hardwar...

I want a programmable device that can flash LED lamps. The time of flashing should be programmable by both simple press switch and a LCD interface and a RF remote controlled interface. Using of PIC or ATMEL microcontrollers are preferable but any type will do. I need it as early as possible and more details will be available for the winner.

Looking for somebody to assist in a small project: an attiny13 based 12V halogen lamp dimmer with integrated charger. Should be operated by one single push-button to power on and dim towards more light and coming back. Further details on request... Should be in c language, with very well documented code to enable me to understand details... ## Deliverables 1) Complete and fully-f...the platform(s) specified in this bid request. 3) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform ...

Programming Specifications This device is for managing a pool water controller and is based on an ATMEL ATMega88 Micro Controller, the version is currently planned to be the ATMega88 MCU 8K 20MHZ 5V 32TQFP. We will send you the hardware. All code will be written in ‘C’ using the WinAVR (tm) which is a suite of executable, open source software development tools for the Atmel AVR series of RISC microprocessors hosted on the Windows platform which includes the GNU GCC compiler for C and C++, located at In addition the PCB contains the AVRISP MKII interface for inline programming of the ATMega88. The display chosen for this is shown below; the CFA635 YYE KL this device uses a logic level serial communications connection. This connection will be connected

...the unit is powered on while the reset sw. is hold the unit will allow RS232 communications from USB to the 6x2 header.(see attachement) -If the RST SW. is pressed for 5 seconds while unit is on will allow communication from USB to the data logger for programming space interval, time interval, And dump memory PCB layoout 2 layer copyrights of hardware and code based on ARM7 23xx ot ARM7 ATmel. Develoment board will be sent. EMbeded experience required software: 2 Security levels, admin and user admin has full rights user can monitor except add units or remote units programming . add delete units from database , historiacal per unit, Unit properties (vehicle make brand plate , driver(name cell ), mileskilometers accordind stadistics, company (group or ...

I have a 2nd part client that requires a GUI that will download, manipulate and re-upload some hex values to some custom electronics via a USB connection. It must be built for Wiondows XP or Vista and it does not matter if it is in VB or C++ etc. The USB connection from the PC will be made via the ATMEL AT90USB which wil be programmed seperately to send and recieve 32 k chunks of data to and from the pc according to a pre-aranged protocol that relies on timed requests from the electronics. The GUI will represent a view into a BMW vehicle and will contain 8 different maps that will be catagorised with meaninful names. Split work into 3 chunks. 1) Take a binary file of typical hashvalues and display on the GUI in the 8 catagories. 2) Download from the device pre-existing hex...

I have a 2nd part client that requires a GUI that will download, manipulate and re-upload some hex values to some custom electronics via a USB connection. It must be built for Wiondows XP or Vista and it does not matter if it is in VB or C++ etc. The USB connection from the PC will be made via the ATMEL AT90USB which wil be programmed seperately to send and recieve 32 k chunks of data to and from the pc according to a pre-aranged protocol that relies on timed requests from the electronics. The GUI will represent a view into a BMW vehicle and will contain 8 different maps that will be catagorised with meaninful names. Split work into 3 chunks. 1) Take a binary file of typical hashvalues and display on the GUI in the 8 catagories. 2) Download from the device pre-existing hex ...

Linux 2.6.26 now supports kernel level debugging using KGDB; however, KGDB is not supported on the Atmel AVR32 processors. We would like to have KGDB ported to the AVR32 processor. The developer will be responsible to demonstrate that the KGDB port is fully functional. The development IDE is the AVR32 Studio V2 from Atmel which is based on Eclipse. ## Deliverables All software is to be developed in C language and must be fully documented so that it can be submitted for inclusion in the mainline kernel.

Our current project requires a small MCU (8-pin) of any manufacturer to control an RS-485 transceiver. The device must be able to identify baud rates from 1200 to 115K from a TTL level serial stream and assert a TTL logic high on 1 pin after a predetermined number of bit times have elapsed. The choice of microcontroller is at the discretion of the coder, however PIC or Atmel devices are preferred. ## Deliverables We have the need for an TTL to RS-485 converter to add to a product we already have in the field (herein The Product). Simply adding a line driver chip to The Product is not possible due to a lack of available I/O to drive the DE/RE lines. This current project therefore is to create an application to run on a small MCU that will perform the following op...

Software that accepts the first 6 channels of DMX and outputs that DMX value to the timer ports Requirements: Software is to written in C for an ATMEL ATMega162 microcontroller Use USART1 (NOT USART0) for the DMX serial input. DMX Channel 0 goes into a 8 bit variable called STARTCODE DMX Channel 1 goes to port OCR3B DMX Channel 2 goes to port OCR3A DMX Channel 3 goes to port OCR1B DMX Channel 4 goes to port OCR1A DMX Channel 5 goes into an 8 bit variable called STROBE Deliverables: Software written in C for an ATMEL ATMega162 microcontroller that is complied without warnings or errors, and has each function documented.

I need ATMEL 89 Series Programmer with ISP (where applicable) for the follwing controllers. I need complete hardware prototype, software exe, source code for both computer side as wel as controller side & customizable screen. Supporting Controllers: AT89C1051, AT89C2051, AT89C4051, AT89S1051, AT89S2051, AT89S4051, AT89C51, AT89S51, AT89C52, AT89S52, AT89C55, AT89C55WD, AT89S53, AT89S8252, AT89S8253 * Softwares should have also options to future support of other new controller. *PC Software should capable to identify the chip itself. *PC Software should capable to READ,ERASE, PROGRAM, LOCK (individual lock as wel as all lock), Auto Program. * PC Software must be capable to accepet INTEL HEX and BIN file. *PC Software must be capable to EDIT directly loaded HEX and save the ...

I am looking to have a working schematics of an electronic muscle stimulator modified. I am looking to add a 4 x 3 keypad to the current display board (This has already been started). I require the schematics to be done using the Proteus software. The current schematics is a fairly simple one, so it should not be too difficult to modify. In addition, I would like to have the chip (Atmel AT89C52 microcontroller) programed (using C preferable with kiel uVision) to make the machine perform its functions. I included a word document that explains how the machine functions within the file attachment. I have also included the old working schematics of the electronic muscle stimulator. **Only serious bidders may apply. Please look at all documents and files before bidding on this project. T...

The project at hand deals with the Atmel AVR studio software, ATmega16 chip as well as the Atmel stk500 board. Utilizing these tools, two analog voltages? will output from a circuit to the ADC pins on the mega16chip.? Here they will need to be converted from binary->BCD->ASCII and output through the UART to a hyperterminal. Simplistic yet tedious. ## Deliverables Time is of the essence!

Por favor, regístrate o inicia sesión para ver los detalles.

I am looking to a working schematics of an electronic muscle stimulator modified. I need the schematics re-assembled using Proteus 7. I need to have the new display board (schematics) working with the current main board (schematics). I have attached the schematics in PDF form. The chip that is used in the schematics is the Atmel AT89C52 microcontroller. Once main board Schematics is modified to work with the new display board it must simulate in Proteus. The Display board is already assembled in Proteus, only the main-board Schematics have to be assembled and modified in Proteus. I will provide the bid winner with the Proteus file for the Display Board. Technical Specifications of Schematics (Circuit): Input 24VDC/2A (power adapter) Outputs: Four isolated channels with individual in...

Summary: For the Atmel AVR microcontroller, write a PS/2 keyboard host routine in assembler so that I can turn on and off the LEDs on the PS/2 keyboard. The assembler routine needs to be setup as a library for the BASCOM BASIC compiler. This BASIC compiler can be downloaded free from <>. I am not familiar with AVR assembler, I do all of my programming from BASIC, that is why I need this routine as a BASCOM library. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the

I am looking to have a working schematics of an electronic muscle stimulator modified. I am looking to add a 4 x 3 keypad to the display board. I would prefer the schematics to be done using the Proteus software. The current schematics is a fairly simple one, so it should not be too difficult to modify. In addition, I would like to have the chip (Atmel AT89C52 microcontroller) programed (using C) to make the machine perform its functions. I included a word document that explains how the machine functions. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other s...

...files from a USB mass storage dongle to attached u-law telecom CODECs.? The? target processor is an? Atmel AT32UC3A1512.? ? ? Atmel provides the USB drivers and FAT file system to read from? a USB dongle in thier delopment kit. The CODECs are standard telecom serial devices interfaced through the SSI port on the Atmel.? Your code will read monitor 16 trigger bits connected to PIO lines on the Atmel.? When a trigger bit is activated, the code will read the audio file for that channel from the USB dongle and stream it to the correct CODEC (1-16).? The code should be able to play 0-16 files concurrently. We wil provide the? Atmel development kit as well as a custom PCB with the? Atmel, 16 CODECs, and 16 trigger switches.? Debug will...

I need an Operating system for Atmel AT90SC6464 or 7272 series. What should it do? Run me an application out user section and providing me some ready functions like SHA , DES , ETU chamgements. More info on request

A circuit with a USB cable to connect with a Laptop. The circuit should have 4 electrical relays (6V 5A 1C) they can be individually turned on/off with the software. The software should be programmed with Microsoft VC++ 6.0. - MFC Dialog Based. The software s...should have 4 electrical relays (6V 5A 1C) they can be individually turned on/off with the software. The software should be programmed with Microsoft VC++ 6.0. - MFC Dialog Based. The software should run in MS Windows XP. Please avoid USB to Parallel Convertes and LPT interface - I mean avoid third party USB interface. For external power supply use 9V PP3 battery or Mains derived Regulated DC. ATMEL AT89xxx series Microcontrollers preferred. The Microcontroller coding should be RIDE compatible otherwise in Assembly Langu...

You will be employeed by me i am based in london uk we will arrange a contract between us of completed work and also in contract confidentiality will be required and privacy a % of finished products sales revenue will be offered to developer developer will need to know how to use logic analyser, protocol analysers and occiloscopes , be able to program cpu and atmel chips be able to code in c and arm assembly be able to reverse engineer lost code in embedded systems and digital circuits be able to debug and create third party add ons for embedded systems and digital circuits also be able to creat custom add on circuits for other devices prototypes for mass production so electronics + software combination is needed if you have ateam in your country also that is interesting f...

_Phase 1 of the project_ - required the pseudo code and flow charts documentation of C source. With reference firmware of this web URL : <> The pseudo code and flow charts should be reference to the IO devices used in the kit. Much comments are already ...>>>It is using AVR atmega 128 MCU. To understand the code to write pseudo code for it sometime it is required to be able to run and debug the code. Agreed. Is this possible that anybody can debug the code in normal windows environment? Or does it require to have some hardware? >>>It does required your normal window with AVR studio 4, datasheet and instruction set of the MCU used can be found on the atmel website as well. >>>Regards ## Platform windows, C IDE

... and this is exactly what we need The possible arguments are: Embedded Linux (Lis of all single-board linux) GPS USB Software for Electronics Engineer (flash a led with PHP or drive LPT port with Visual Basic) Repository about Microcontroller DemoBoard-StarterKit REpository about LowPower Microcontroller ARM research NXP-ATMEL-CIRRUS...... Your Personal Experience I repeat, all resources are on line, the most part of Your works is an electronics engineer FILTER and report in my website or a technical article, if You can do it. After this test, we can talking about a lot of category for a regular job. THE JOB MUST BE EXHAUSTIVE and ACCURATE and in the TIME we will SET!!! PLEASE GIVE UP IF YOU ARE NOT SURE OR

Need to develop an stand alone smartcard programmer based on an atmel at91sam7xc processor.

I am looking for someone that knows how to interface an ATMEL microcontroller through a serial port with visual studio 2005. A VB software program has already been created. However, the serial port interface needs to be implemented with the UART (Universal Asynchronous Receiver-Transmitter) of an ATMEL microcontroller. NET 2.0 provides a serial port class that will permit access to the serial port’s low-level functionality, freeing the programmer from having to deal directly with the Windows security system. I am using an ATMEL ATMEGA16 for the microcontroller. I am using a BlueSMiRF extended Bluetooth radio device which acts as virtual serial port with the computers serial port. My current source code and complete description is the attached files. ## Delivera...

I am looking for someone that knows how to interface an ATMEL microcontroller through a serial port with visual studio 2005. A VB software program has already been created. However, the serial port interface needs to be implemented with the UART (Universal Asynchronous Receiver-Transmitter) of an ATMEL microcontroller. NET 2.0 provides a serial port class that will permit access to the serial port’s low-level functionality, freeing the programmer from having to deal directly with the Windows security system. I am using an ATMEL ATMEGA16 for the microcontroller. I am using a BlueSMiRF extended Bluetooth radio device which acts as virtual serial port with the computers serial port. My current source code and complete description is the attached files. ## Delivera...

Project overview: Automated machine that cuts material. Material is clamped to a moving table and fed into a stationary rotating blade similar to a table saw. Table feed rate varies based on blade RPM. The objective of this program is to continually adjust table feed rate to maintain a specified blade RPM. Blade RPM slows as denser material is encountered therefore table feed rate must compensate to maintain specific blade RPM. User interface: User clamps material to be cut onto table, operates machine using the following five momentary push buttons. Emergency stop - Stops all motion. Jog forward and reverse - allows user to position table at a fast rate in either direction. Blade start - Starts blade rotation. Feed start - begins cutting operation. Additional hardware interfaces Limit swi...

I am looking for someone that knows how to interface an ATMEL microcontroller through a serial port with visual studio 2005. A VB software program has already been created. However, the serial port interface needs to be implemented with the UART (Universal Asynchronous Receiver-Transmitter) of an ATMEL microcontroller. NET 2.0 provides a serial port class that will permit access to the serial port’s low-level functionality, freeing the programmer from having to deal directly with the Windows security system. I am using an ATMEL ATMEGA16 for the microcontroller. I am using a BlueSMiRF extended Bluetooth radio device which acts as virtual serial port with the computers serial port. My current source code and complete description is the attached files. ## Delivera...

Hello everyone, The code I need is for and Atmel microcontroller, this IC is driving 4 Digits 7 Segments and a 2X6 Keypad. What I would like the code does is when I push the bottom 1 will display the number one in the digit 2 and 4, if i press the # i would like to clean the digits. As you can see in the schematic the digits are in multiplex. If you have any question write an email to me. Thanks. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--De...

Hello! I am looking similar like this BUT for USB chips : Could be also with segment display. MCU's accepted are Microchip or Atmel. BR, Harri ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop software or software the buyer intends to distribute: A software installation

I have a code written for Atmel ATMega88 to be ported to Chipcon CC2430. Can anyone help?

Hi, I am looking microcontroller. For me important is MCU speed and USB transfer speed. - must be possible to add memory card for data logging - **full-speed** USB 12 Mbps - at least 40 pins or near (more or less) - at least 10-30 ADC's - very fast "cpu" - quite popular make/model so that I can get help for it easily What can you offer? I think Atmel or something like that is easy to help. Programming and circuit design I will not make by myself. I open new bid for it. Tell me what you find, Harri ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliver...

...program. This plug-in DLL will simulate a microcontroller family such as ATMEL, INTEL, Motorola, Microchip etc. The simulator will allow the user to specify a program hex file to be simulated, the simulator will allow the user to see the dissasembly of the hex file, single step, break points, trace, watch, change/examine memory etc like a debugger. The simulated Microcontroller will also interact with other components in the spice circuit, for example iinput and output voltages to/from the processor pins. Functions to read/write voltages already exist in a library. The first part is to make a basic architecture that can simulate many different processor families, for example PIC18 family, ATMEL AVR family, ARM family etc. A configuration file will...

Hello, I am looking for a developer to design a DMX512 Transmiter and receiver Controller using any of the AVR Atmel microcontrollers. The controller design has to be flexible to be setup for outputs of, analog 0 to 10VDC or PWM up to 1.0KHz or GPIO. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop software or software...

This project involves developing a graphics device driver for Windows CE that supports Direct Draw. High performance is a requirement. The target platform is based on Atmel AT91RM9200. The scope of the project is unclear, and will be discussed with the right coder. ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in ready-to-run condition, as follows (depending on the nature of the deliverables): a) For web sites or other server-side deliverables intended to only ever exist in one place in the Buyer's environment--Deliverables must be installed by the Seller in ready-to-run condition in the Buyer's environment. b) For all others including desktop softw...

This design project involves the production of a working prototype of an underwater sound velocity sensor. Full details can be found in the attached file... ## Deliverables 1) Complete and fully-functional working program(s) in executable form as well as complete source code of all work done. 2) Deliverables must be in...request. 3) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform Any suitable microcontroller or DSP (PIC, Atmel, TI etc). Any suitable timing chi...