The term CAD/CAM denotes computer aided design and computer aided manufacturing. It is usually referred to in the context of software tools that perform a wide range of engineering functions. Selecting a proper CAD/CAM system is important to ensure that the stages of conceptualization and final production are under proper control. If you are foraying into computer-aided design and manufacture, you need an expert. There are many freelancers who can do this job for you at a relatively low cost. So, post your CAD/CAM job here and make your life easier! Contratar a CAD/CAM Designers

Filtro

Mis búsquedas recientes
Filtrar por:
Presupuesto
a
a
a
Tipo
Habilidades
Idiomas
    Estado del trabajo
    84 trabajados encontrados, precios en USD
    Neck support 6 días left

    I am a bodyworker who wants to create a support to help hold clients' heads in the right position.

    $190 (Avg Bid)
    $190 Oferta Promedio
    13 ofertas
    Architecture work in Revit 6 días left
    VERIFICADO

    We are looking for a Draftsman to draw up plans in Revit. The candidate must be from the UK and have good UK building regulation knowledge and be able to do technical construction drawings.

    $18 / hr (Avg Bid)
    $18 / hr Oferta Promedio
    19 ofertas

    I have 2 Lectra Modaris .MDL files for a dress graded in 3 sizes. I need to send a PDF version to the tailor so that it can be printed locally. It is a 2 piece pattern (Front + back) with 2 piping pieces.

    $57 (Avg Bid)
    $57 Oferta Promedio
    5 ofertas

    We have Solidcam 2016 added onto solidworks 3d cad software and need a post processor which will create code for a 1991 Fadal VMC 40 with the legacy cnc88 controller. "Format 1"

    $213 (Avg Bid)
    $213 Oferta Promedio
    5 ofertas
    Smart Backpack 6 días left
    VERIFICADO

    Techincal Designing of the smart backpack with electrical and mechanical components.

    $750 (Avg Bid)
    $750 Oferta Promedio
    2 ofertas
    Smart Backpack prototype 6 días left
    VERIFICADO

    Designing Smart Backpack and Integrating electrical components and sensors that connects with the smartphone and smart watches

    $1089 (Avg Bid)
    $1089 Oferta Promedio
    4 ofertas

    I need someone who can start right away as deadline is 8 hours from now onwards I will pay $30 for this, pls only bid if you accept my budget. I have a SolidWorks file of analysis of handlebar system. I just need 1 report of 2000 words to be prepared for now I am looking for some long term individual professional, agencies are not invited. The report should be unique Cheers

    $99 (Avg Bid)
    $99 Oferta Promedio
    4 ofertas

    I want someone to design for me a sketch of an idea i have for an outfit and manufacture it

    $420 (Avg Bid)
    $420 Oferta Promedio
    10 ofertas
    3d modeller 6 días left

    Designing a mouse shell for a circuit board and mouse wheel I already have one hand. I want to create a light ergo shell with the design aspects of the mouse I currently have, but smaller and differently shaped. I want to essentially create a fusion between image3 and ec2-b-01 any dimensions I can provide. Requirements - decreased volume of the shell, which will reduce weight - similar shape to...

    $185 (Avg Bid)
    $185 Oferta Promedio
    27 ofertas

    Hi freelancers, I need a mechatronics engineer to design and prototype for me a small portable power bank. I am very interested in the documentation of how it's done and how each component works. Features can be discussed via chat. Thanks in advance.

    $107 (Avg Bid)
    $107 Oferta Promedio
    9 ofertas
    Ido Project 6 días left

    - Restaurant design in New York City. - The complete design-to-build Full Self-Service Cognitive Computing Initiated Restaurant Automation Integrated Solution three-story building - Autocad / BIMx design of full restaurant floor plans, MEP, 3D views - Simulation

    $19 / hr (Avg Bid)
    $19 / hr Oferta Promedio
    21 ofertas

    I need an expert for designing a custom model for a company located in London, expertise regarding CAD or sketchup would be a plus.

    $120 (Avg Bid)
    $120 Oferta Promedio
    48 ofertas

    We are an real estate agency (First Estates - [iniciar sesión para ver URL]) based in Sofia Bulgaria and we are looking for someone that can prepare a floor plans for our properties. The person has to be based in Sofia and works as a freelancer. Example: [iniciar sesión para ver URL]

    $144 (Avg Bid)
    $144 Oferta Promedio
    28 ofertas

    Hello , I want to hire Siemens NX CAM add- on programmer . I need add-on to find hole and make drill automatically with process.

    $3966 (Avg Bid)
    $3966 Oferta Promedio
    5 ofertas

    I am looking for a freelancer that can take my CT Scan images and create a 3D model. I found these instructions recently and it appears to be an easy process. These steps are for free use. [iniciar sesión para ver URL] I have my CT Scans on a disc now. I can post the CD on Dropbox or mail it to the provider.

    $108 (Avg Bid)
    $108 Oferta Promedio
    23 ofertas
    CAD Drawing for Home Plan 5 días left
    VERIFICADO

    I need to digitize our Home Study Plan into native CAD File and High Resolution PDF suitable for sharing with Contractors. We will also make some modest changes. For example, we will NOT be building the side porch, so that can be left entirely off the study plans. Once we secure we agree on a contract with a contractor we will come back for a second project involving the creation of full, det...

    $138 (Avg Bid)
    $138 Oferta Promedio
    80 ofertas

    I need someone to recreate the product I have attached (attachment 1 - jan12). It is a spanner/wrench (attachment 1) with 1. A ratchet/gear mechanism for 10mm bolts (attachment 2). 2. An open ended head for 13mm bolts. The ratchet needs to be modelled! The goal of the project is to be able to 3d print this tool as ONE PIECE and it must work!! I am aware to to print as one piece you may need to ...

    $137 (Avg Bid)
    $137 Oferta Promedio
    43 ofertas

    I would like a toy to be assembled using wooden pieces. I want to design exact pieces so that it can be sent to a CNC machine. I have a basic idea about it and want an experienced CAD draftsman to design the various pieces with precise measurements so that it can be assembled.

    $108 (Avg Bid)
    $108 Oferta Promedio
    28 ofertas

    We want to change our Autocad Architecture System from 2010 to 2019. We need help for getting all our enviroments, walls and texts to the new System.

    $120 (Avg Bid)
    $120 Oferta Promedio
    18 ofertas
    Scaffold Design and Estimate 5 días left
    VERIFICADO

    Needsomeone to design and estimate ringlock scaffold

    $105 (Avg Bid)
    $105 Oferta Promedio
    8 ofertas

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets for commercial and residential INTERIOR spaces. ...

    $9 / hr (Avg Bid)
    $9 / hr Oferta Promedio
    32 ofertas

    We are a factory in china, who manufacture Pneumatic Fittings over 10 years, mainly export to USA, Europe. Quality is our first Job, and stainless steel fittings are our TOP advantage products. Our website: www.ideal-bell.com.

    $348 (Avg Bid)
    $348 Oferta Promedio
    38 ofertas

    We sell Ringlock scaffold. We require someone to provide scaffold design and material lists from building plans we provide.

    $27 / hr (Avg Bid)
    $27 / hr Oferta Promedio
    13 ofertas

    We are looking to move our construction business to a new plot and wanted to find the best possible use for the space. I have uploaded the boundaries of the plot in AutoCad, it is approximately 22,000m2. The layout should include the following- 1) Concrete batch plant (MUST BE IN THE SOUTH WEST CORNER OF THE PLOT). Area ~5,000m2 2) Warehouse building (s) can be one large warehouse or a numb...

    $500 (Avg Bid)
    Destacado Garantizado Sellado
    $500
    3 participaciones
    AutoCad drawings 5 días left

    I am studying the 3 main Pyramids of Giza and hope to write a book about them. I firstly want 2D AutoCAD drawings that highlight key dimensions. I have these for the Khufu (Cheops) Pyramid on a XL Spreadsheet. I want to highlight the inherent geometrical patterns by using different colored lines but this involves a large area outside the structure also. Ultimately I want to create accurate 2D plan...

    $13 / hr (Avg Bid)
    $13 / hr Oferta Promedio
    60 ofertas
    Schematic Drawing 5 días left

    I need it with wiring specs, tubing size specs and length specs. Also, a place to add a can of freon and it has the capabilities of running gas and/or electricity.

    $40 (Avg Bid)
    $40 Oferta Promedio
    6 ofertas

    front and back 3 fashion design with colour

    $30 (Avg Bid)
    $30 Oferta Promedio
    3 ofertas

    front and back 3 fashion design with colour

    $2 / hr (Avg Bid)
    $2 / hr Oferta Promedio
    3 ofertas

    Hi, I need structural drawing and calculation for 640 sf contanier home. it contains 4 x 20' ft container. it should be according to Santa Rosa CA codes. please check the attached doc and let me have your quote. Regards, Nade

    $245 (Avg Bid)
    $245 Oferta Promedio
    18 ofertas

    Seeking an engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets for commercial and residential INTERIOR spaces. ...

    $322 (Avg Bid)
    $322 Oferta Promedio
    52 ofertas
    Trophy icon CAD drawings 5 días left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    $64 (Avg Bid)
    $64
    10 participaciones
    Product desighn 5 días left

    Im looking for someone to assist with desgning a hydroponic growing product. I will be able to provide the spec of the product. I will require technical drawing to be done sp that i can have a prototype made from an injection mold.

    $412 (Avg Bid)
    $412 Oferta Promedio
    52 ofertas

    Требуются специалисты с навыками BIM-проектирования: архитекторы, инженеры ОВ и ВК, электрики, генпланисты. На данный момент мы ищем исполнителя для выполнения проектирования BIM модели жилого многоквартирного дома (5 этажей, 2 подъезда) уровня LOD100 или LOD200 в разделах АР и КР, по нашим 2D чертежам.

    $797 (Avg Bid)
    $797 Oferta Promedio
    6 ofertas
    Autocad plans for home 4 días left
    VERIFICADO

    I am putting together an idea for a dream home. I have some ideas sketched up and would like to have them put into a DWG file so I can add and change them as I please. Just a 2d model.

    $27 (Avg Bid)
    $27 Oferta Promedio
    64 ofertas

    Hi, Looking for an experienced 3D modelling professional to work for us. We need basic packaging container modelling to be done for around 10 unique product containers. The final artwork will be used in a brochure. PLEASE CHECK ATTACHED PDF BEFORE BIDDING Please share samples, timeline & cost in your proposal. Only apply if you have experience and can do this quickly. Looking for long-term ...

    $123 (Avg Bid)
    $123 Oferta Promedio
    46 ofertas
    Linea di Tank industriali 4 días left
    VERIFICADO

    Ho bisogno di riprodurre tank per il settore birra. I file dovranno essere restituiti in solidworks. Elaborati: 1- Assieme 2-Esploso 3-Bollatura

    $419 (Avg Bid)
    $419 Oferta Promedio
    8 ofertas

    Would like a machine drawn up so we can then get all componentry laser cut. We will supply all sizes that we would like drawn and all hardware included.

    $277 (Avg Bid)
    $277 Oferta Promedio
    101 ofertas

    Hi, receiving every day 5 to 10 drawings in 2d in pdf or jpg or another format. All this date recorded by a smartphone camera. Drawing type could be hand scatch or computer generated kitchen plan top drawing and layouts. I need online tool which could help faster calculate square meters on how much materials in m2 is a need for that project. That would help me speed up quotes for customers. Let sa...

    $175 (Avg Bid)
    $175 Oferta Promedio
    19 ofertas
    cad engineer 4 días left

    With 750 drwaing of normal google mapping.

    $294 (Avg Bid)
    $294 Oferta Promedio
    31 ofertas

    Create a smartwatch design - stl and rendered CAD design . I need an original design to be inspired by the original pebble time design and should also be have a spiritual element to it as well . Design overall concept

    $300 (Avg Bid)
    $300
    2 participaciones
    Simulation of robotic arm on Catia 4 días left
    VERIFICADO

    I am looking for a catia expert that could do a simulation of 3DOF robot arm model that I will be sending.

    $81 (Avg Bid)
    $81 Oferta Promedio
    20 ofertas

    Need auto cad cabinet elevations from architectural house plans.

    $133 (Avg Bid)
    $133 Oferta Promedio
    51 ofertas

    I need an architect or draftsman to create drawings and dimensions for an office building in Midtown Atlanta.

    $927 (Avg Bid)
    Local
    $927 Oferta Promedio
    10 ofertas

    A small shape cut on CNC out of MDF, approx size 19"x12" I am a few months away from buying a CNC machine to cut wood. I just got started on learning how to design the shape I need cut within Fusion 360. I would like my file to be cut in in tool path > Design in Fusion 360, upload to Carbide Create in a SVG file and cut using Crabide Motion. Like I said, I have the file already made ...

    $28 (Avg Bid)
    $28 Oferta Promedio
    8 ofertas

    From the building plan, I want to draft it in software. Solid works is preferred other software can work too. I need to get this done as soon as possible. Require somebody with experience.

    $111 (Avg Bid)
    $111 Oferta Promedio
    69 ofertas
    Design simple schematic and PCB 4 días left
    VERIFICADO

    I have a simple electronics project which consists of a NodeMCU ESP8266 and a PCB. Simple schematics as PDF is done. Now I want to have a proper Autocad EAGLE project out of it to print a simple 2-sided PCB. There are about 20 connections to be done on the PCB, so it's really simple.

    $35 (Avg Bid)
    $35 Oferta Promedio
    34 ofertas

    I am looking to design a prototype of a horizontal underwater turbine to generate electricity (must include the housing that is waterproof). Would need a CAD design that outlines the "structure" similar to a typical wind turbine (as outlined here: [iniciar sesión para ver URL]). We are targeting a 1kw-5kw generator. Freelancer to provide CAD design of dimension of the following: (...

    $1430 (Avg Bid)
    $1430 Oferta Promedio
    34 ofertas

    Hi I own a scooter company and had some CAD designs of some wheels made a few years ago but have lost the files so just have the jpeg images. I would need someone to recreate the design in the image so I can send it to the factory. These are wheels for toy scooters you use at skate parks, and wheels need to be evenly balanced in weight and withstand considerable impact.

    $146 (Avg Bid)
    $146 Oferta Promedio
    78 ofertas
    Looking for a robotics expert 4 días left
    VERIFICADO

    I have a CAD drawing of a 3 DOF robot arm I would like to simulate the movement of using Gazebo and ROS.

    $59 (Avg Bid)
    $59 Oferta Promedio
    6 ofertas

    Principales artículos de la comunidad CAD/CAM