nRF52840 Programming and IDE Setup

Hello I have experience in working with nRF52 BLE SoCs and can train you completely. I use Segger Embedded Studio, Keil 5 etc. If you wish we can discuss in chat. Thank you.

Hello, I have hands-on experience with nRF52840 programming and PCB design. I have worked with Segger Embedded Studio, Keil, platformIO. I have experience with ADC, UART, PWM, SPI, I2C protocols and BLE central/peripheral profiles. I can write code and setup development environment. Previously I have worked with wireless sensor network based on nRF52840.

Hi There, I am a senior Expert and Have more than 5 years of experience in electronics and embedded design. I have experience in nrf transceiver modules and familiar with ADC and BLE. Just check my profile and share your details. Time and Budget will be discussed. Thanks

With a diverse range of skills that perfectly align with your project requirements, my team and I are confident in our ability to execute this task to perfection. Our extensive experience in embedded systems design and development, coupled with a deep understanding of low-level programming on platforms such as nRF52840, position us uniquely for your project. We promise not just to create a functional programming environment, but one that demonstrates BLE data transmission to the central android device. We have had the pleasure of developing solutions using varied Integrated Development Environments (IDEs) like Segger embedded Studio, Visual Studio Code, etc. This enables us to confidently direct the project to your preferred IDE while being flexible enough to work on any other available/accessible IDE. Furthermore, we have successfully handled projects involving BLE and nRF52840 before; the kind of experience you require for seamless project execution. Choosing us will get you a highly collaborative partner dedicated to meeting and exceeding client expectations. The successful completion of this project has the double benefit of potentially positioning me and my team as top contenders for your more complex and higher-income projects. Achieve economic efficiency without compromising on the quality! Hire us for an all-in-one solution!

Hi, We can set up the IDE and configure the nRF52840 for your project. Let's start!

Hello. ⭐ ⭐ ⭐ ⭐ ⭐ Over 10+Years of Experience in Electronic Design in various Domains Like Power Supply, Consumer Electronics, Telecom, RF Boards. I have extensive experience in areas including Circuit Design, Circuit Simulation (Analog, Digital), PCB design, RF Design, Embedded Software(STM32 Keil, Mplab, FPGA, ESP32, Arduino, PIC, Rasberry PI, C/C++) etc. Expect me to help your business as if I am growing my own. I would love to hear from you. Warm regards. Khalid

Hi, I have 7+ years of experience in embedded electronics and especially with nordic platform. We actually have our module based on nRF52805 so I am very familiar working with nordic chips. Contact me in the chat so we can discuss the details. Dominik

Good day I am a hardware and firmware developer with 5 years experience developing IoT and telemetric products. I have developed Nordic applications using Segger Studio using SDk14 and up. I believe that my experience would be of much use to complete your project as required. Feel free to message me to discuss your project in more detail

As a seasoned engineer with a wealth of experience in embedded systems, I believe I am the ideal candidate to tackle your nRF52840 project. Although my background includes a focus on technologies like Gömülü Yazılım and Artificial Intelligence, my extensive understanding of low-level programming aligns well with the task you've outlined. I have successfully set up numerous Integrated Development Environments, including Segger embedded Studio, VS Code, and various cloud IDEs to great effect. In terms of nRF52840 familiarity, I'm confident in my ability to navigate its intricacies and harness its full potential towards creating a functional programming environment specifically tailored to your needs. My work history at MAYFly Aviation equipped me with hands-on experience that is directly relevant to this project. I have been responsible for multiple projects similar to yours which involved setting up IDEs and developing BLE applications. Finally, I appreciate the value of data transmission in BLE central systems and understand that your intended product must demonstrate excellent capability in this area. By choosing me for this project not only will you be assuring quality workmanship but also creating an opportunity for further collaboration on more complex projects as stated in the description. With all these attributes, I am confident that I can deliver outstanding results on time and within budget. Let's connect and get started on making your nRF52840 truly shine.

We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently within timeline. If you choose me, I think you won't regret. Best Regards.

Hi, good afternoon, thanks for your post, I am an Electronics Engineer specializing in Embedded systems having vast expertise in Nordic SoCs programming, specifically, using the nRF32840 device. I am very familiar with the official Nordic SDK, having developed dozens of projects using Segger Embedded Studio. Moreover, my expertise covers most of the peripherals available in the nRF32840, including the radio and ADC. Finally, I am very proficient at BLE, having used it in several projects before. Please send me a message so we can discuss your project further, I look forward to your message, have an excellent day, Regards,

With a thorough understanding of embedded systems and low-level programming, I have developed a keen interest in nRF52840 over the years. My previous experience with this platform includes successful BLE projects similar to what you're seeking. This, coupled with my proficiency in both Segger Embedded Studio and VS Code and knowledge of C, C++, and Python ensure that I'm well-suited for configuring your project's IDE and code. What sets me apart in the crowded landscape of developers is not just my technical expertise, but also my reliability, timeliness, and commitment to complete client satisfaction – best exemplified by my 100% job completion rate and 5-star reviews across all my projects. While I understand the current requirement is relatively straightforward, I'm intrigued by the promise of more complex and high-reward assignments in the future, which serves as an incentive for me to go above and beyond in delivering exceptional results for you. In conclusion, I am Muhammad Zeeshan – a dependable developer available round the clock that you can trust with your project. I am confident that by leveraging my skills and experience in embedded software and systems alongside deep knowledge of the nRF52840 platform, I can not only configure the IDE as per your preferences but also ensure that your device seamlessly transmits data to BLE central. Let's work together to make this vision a reality!

Hello Sir, I'm Mohamed Elnaggar, a professional embedded software engineer. I've worked on many projects that involved many different microcontrollers and wide range of applications. I see that you aim to working IDE for the nRF52840 SoC, I've prepared some sources and materials handle this task. Give my previous experience on using different IDEs and microcontrollers like stm32 series and tivaC, and esp boards, make this project achievable in a professional way. Kindly check my profile for related work experience and projects. I'm really interested in providing a completed and professional work, and achieving your satisfaction. Looking forward to hearing from you soon to further discuss your project needs. Best Regards, Mohamed Elnaggar