Find Jobs
Hire Freelancers

Firmware Design of STM32 ARM Cortex Sensor PCB in C Compiled with GCC

$750-1500 USD

Cerrado
Publicado hace más de 6 años

$750-1500 USD

Pagado a la entrega
Firmware Design of STM32 ARM Cortex Sensor PCB in C Compiled with GCC Project Objectives: – Understand elements of a small PCB design, sensor data and signals – Consultant to write and test firmware for said PCB. Fully documented code required. Target Price for Project: US$750 or less Expertise Required: – C – GCC – Signal Processing – Circuit Design – Knowledge of Delta-Sigma ADCs Inputs: – Altium .schdoc, .pcbdoc, .prjpcb and .prjpcbstructure files + Altium Source files – 3D Models – BOM, gerber, source files – Datasheets – Reference Docs – Actual PCB, if needed. Key Components on Board: – Operational Amplifiers - Op Amps CMOS QUAD RRIO OP AMP – 100mA Ultra-Low Dropout Regulators With Shutdown – Switched Capacitor Voltage Converter Negative 250-mA Low-Dropout Regulator With – – Reverse Current Protection 250-mA Low-Dropout Regulator With Reverse Current – – Protection Analogue Switch ICs Quad Single USB 2.0 ESD protection to IEC 61000-4-2 – level 4 Digital to Analog Converters - DAC 12-Bit 4Ch Precision DAC STM32 ARM Cortex-– – M4 32b MCU+FPU, 210DMIPS, 1MB Flash/192+4KB RAM, USB, Ethernet, 17 TIMs, 3 ADCs – SINGLE-CHIP USB TO UART BRIDGE 24-bit, delta-sigma ADC Deliverables: – Tested and confirmed firmware – Documented unit tests required – Fully documented code required. – Must use C and GCC compiler Please answer these questions in your bid: 1. What is your experience with signal processing for analog inputs? 2. What is your experience with microcontroller interfaces to other logic ICs and experience with I2C and SPI? 3. What is your experience with output to serial and USB and ensuring data is transmitted with integrity? 4. What are your unit testing and documentation practices? Additional Requirements: 1. Please PM if you have any specific questions. 2. All work related to this project is to be owned by us. A signed innovation assignment agreement and a NDA is required. 3. All vendors agree to assign and does hereby assign to the contest host, bidhere23, (or any person or entity designated by the host) all his/her right, title and interest in and to all Developments and all related patents, patent applications, copyrights and copyright applications, designs, output, and other intellectual property delivered as part of this contest. 4. All vendors agree that all information and know-how, whether or not in writing, of a private, secret or confidential nature concerning the host’s business (collectively, “Proprietary Information”) is and shall be the exclusive property of the host.
ID del proyecto: 15218519

Información sobre el proyecto

32 propuestas
Proyecto remoto
Activo hace 7 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
32 freelancers están ofertando un promedio de $1.210 USD por este trabajo
Avatar del usuario
Hi Sir, We have read your project. We have experienced with STM32 line of all microcontrollers. we have such nucleo boards in our inventory for testing and debugging the code. we are best in designing PCB layouts in Altium designer 17 that is latest of all and we have registered version with full licences. Please go through our portfolio so you can see some of our selective work that will give you confidence about our team and its skills. We are team called TURKTRONICS, We are engineers and developers integrated into well organized team. We offer you our services for this project. In this bid, prototyping is not included, however you can pay slight additional charges to get rapid prototype development. Looking forward to work with you on your project. Regards, Ahmad Lead Technical Engineer TURKTRONICS
$750 USD en 10 días
4,8 (50 comentarios)
6,7
6,7
Avatar del usuario
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, Bluetooth & GPS designs,CAN communication, EEprom. UART , RF circuits ,Protocols for networking, wi-Fi routers,OBD diagnosis with CAN bus protocols, Electrical vehicles and AC drives, stepper motor controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, synchronous rectifiers, Solar MPPT chargers, Solar trackers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
$1.333 USD en 20 días
4,9 (31 comentarios)
6,3
6,3
Avatar del usuario
I have expert level skills in STM32F/STM32L family of MCUs with IAR, Keil MDK and GCC tools. I assure you the best solution to your work. Please contact me for full details. Relevant Skills and Experience Embedded Systems Firmware Development Prototyping PCB Layouts Proposed Milestones $1250 USD - Complete Solution as per deliverables
$1.250 USD en 30 días
4,6 (42 comentarios)
5,9
5,9
Avatar del usuario
I have experience with analog signals processing as for instrumentation works i have done in the past. I have experience with SPI, I2C and serial to USB convertors. Relevant Skills and Experience I can follow the desired testing and documentation. I am an electronic engineer with more than 10 years of experience. due to limited space I cannot discuss more , please contact me to discuss details Proposed Milestones $800 USD - complete
$800 USD en 10 días
5,0 (16 comentarios)
5,6
5,6
Avatar del usuario
hello i am interested in your project. i have good skills in circuit and pcb design. Expérience et Compétences appropriées i have worked in som projects that involves the use of stm32 microcontrollers ( stm32f1 , stm32f2 and stm32f4). i have used keil uvision in my projects. Étapes proposées $800 USD - stm32 project. i have all developement tools for this microcontrollers. we ca discuss details in private chat.
$800 USD en 40 días
4,7 (45 comentarios)
5,9
5,9
Avatar del usuario
A proposal has not yet been provided
$888 USD en 10 días
4,7 (48 comentarios)
5,6
5,6
Avatar del usuario
Hello, I have more than 5 years expirience with STM32. Use gcc/eclipse. Also have a good knowledge in analog (including 24 bit sigma-delta ADC). Соответствующие навыки и опыт 1. Filtering, FFT 2. Use all microcontrollers interfaces (including SDIO, camera) 3. Use crc and Xmodem for serial communicationwith integrity 4. Use Unity Предлагаемые промежуточные платежи $1000 USD - working project
$1.000 USD en 30 días
4,7 (19 comentarios)
5,7
5,7
Avatar del usuario
Highly skilled developer, but this space is limited to answer all of your questions. Change my bid to your price when I get full details about the task. STM32 and GCC is my tool so quality assured Relevant Skills and Experience Total 22 years of programming skills in C with vast working experience Proposed Milestones $1250 USD - Lets discuss Lets start discussing if you are in need of quality work. Thank you
$1.250 USD en 20 días
5,0 (38 comentarios)
5,6
5,6
Avatar del usuario
EE here to help u sir..i am an embedded systems engineer with all the skills u want Relevant Skills and Experience EE Proposed Milestones $1250 USD - required work
$755 USD en 20 días
4,9 (30 comentarios)
5,4
5,4
Avatar del usuario
Dear Sir, We are a small R & D company, based in Bulgaria, Europe. We work exclusively with U.S. partners. We specialize in developing Embed systems based ST(STM32),Microchip (Atmel – AVR,ARM) and TI (MSP430) MCPUs and peripheries. We realize projects with requirements similar to yours. Our tools for development STM32 based systems are : System Workbench for STM32 - free IDE Atollic TRUEStudio for STM32 Keil ARM - free for STM familli STM32 DISCOVERY boards MikroPROG - debugger emulator About your Q: //1. What is your experience with signal processing for analog inputs? I writing and have realized others soft drivers for devices there use ADC STM32 - for example PIR Infrared Sensor IRA-E900 //2. What is your experience with microcontroller interfaces to other logic ICs and experience with I2C and SPI? I realized soft drivers for : - ADS111x Ultra-Small, Low-Power, I2C-Compatible, 860-SPS, 16-Bit ADC - AD5662 - SPI based 16-Bit nanoDACT - I2C EEPROMs - for example 24AA1025 - INA220 drivers - Drivers for GDE021A1 EPD SPI based //3. What is your experience with output to serial and USB and ensuring data is transmitted with integrity? For now we use USB to TTL seials converter - as Virtual COM //4. What are your unit testing and documentation practices? I have 10 years of experience We use for testing,debuging and writing code : STM32 DISCOVERY boards MikroPROG - debugger emulator Altium Designer use for circuit , PCB design and create full DOCs Regards Valeri T.
$1.666 USD en 20 días
4,8 (12 comentarios)
5,6
5,6
Avatar del usuario
Hi. I'm AlexFaster. Relevant Skills and Experience all Proposed Milestones $1500 USD - for whole project
$1.500 USD en 60 días
5,0 (3 comentarios)
5,0
5,0
Avatar del usuario
I am proficient in the following : -> Embedded C -> CooCox CoIDE -> STMcubeMX Code generator -> STM32 ARM Cortex M series I can deliver the firmware you need fast and robust. I hope you check my portfolio, reviews and rating. I made projects based on STM32, So I have the sufficient experience to deliver your high expected quality. If you choose me, I think you won't regret. Contact me for any further details
$750 USD en 20 días
5,0 (5 comentarios)
3,9
3,9
Avatar del usuario
Dear sir, We sonen engineer solutions provide Design, Manufacturing and consultancy services to Mechanical, Electrical and Electronic industries, we have qualified designers we support for design and development support case to case basis. our expertise is CAD/CAM/CAE ,PCB Design and development. i have 17 years of experience in product design, and development, worked on electromagnetic product design. please send us the details. Thanks Uday
$1.676 USD en 20 días
5,0 (1 comentario)
3,8
3,8
Avatar del usuario
Hello We have a team experienced in embedded systems, ARM MUCs, I2C, SPI, UART, ADC, DAC in many projects. We have also developed a similar project with TI ADS1257 and STM32F4 Discovery as a medical equipment. We design PCBs with Altium Designer with our libraries. 1 We use analog inputs with 4-20mA sensors(temperature, pressure etc) 2 Experienced in STM32F4, EFM32, Kinetis MCUs with UART, I2C, SPI interfaces for many peripherals 3 We have also experienced in USB and serial converters as CP2105. 4 Oscilloscope, Logic Analyzer, JTAG capability for testing. Documentation is a requirement for serious projects. We will gladly assist you in your project. Regards UZelectronics
$800 USD en 25 días
5,0 (1 comentario)
0,7
0,7
Avatar del usuario
This project is similar to Polymerase chain reaction (PCR) project(with FRDM-KL25Z microcontroller,Delta-Sigma ADCs ) c,gcc which i completed recently .I Have good experience in DSP projects. Relevant Skills and Experience 1) Strong in C, DSP, Linux drivers, FREE-RTOS porting to arm32 platforms,Bare metal systems , system programming and networking. 2) Good mathematical background to handle DSP based projects. Proposed Milestones $250 USD - Project Requirement analysis ,Highlevel design,Detailed Design. $500 USD - Firmware development ( documented) and test cases . $500 USD - Testing and Delivery. Additional Services Offered $1 USD - Complete project Design ,Delivery and Maintanence 1)Do you want this project to be bare matal or RTOS based. 2)Design point of the project.
$1.250 USD en 20 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I'm an italian electronic engineer with more than 14 years of work experience. I work as HW designer; FW and SW developer. Competenze ed esperienze rilevanti - STM32 C GCC development (Eclipse CDT + GCC) - HW bus (UART, I2C, SPI,...) STM32 code - lot of C library developed for STM32 Pietre Miliari proposte $832 USD - Project
$832 USD en 90 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I have 3 years industial working experience on STM32 series chip, including building development and test environment with eclipse, FreeRtos Implementing, SD card access, Ethernet communication, UART, SPI, I2C, DMA, etc. Relevant Skills and Experience 1. capable of applying digital filter in signal processing software, experience of using rms, floating calculation function from STM32F4 / STM32F7 series 2. Experiece of using I2C/SPI to communicate peripheral devices, such as ADCs, LCD, etc. 3. Experience of developing UART interfaces, such as debug trace, Modbus comms, etc. 4. Experience of unit testing using check framework Proposed Milestones $200 USD - Firmware structure and function specification $500 USD - Source Code Release $300 USD - Source Code with Unit Testing $150 USD - Source Code Release after Function Review $200 USD - Final Release
$833 USD en 20 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Design system architecture, define schematics , PCB trace and C or C++ embedded firmware programming. Experienced developing medical devices (signal processing STM32 processor) Habilitats rellevants i experiència more of 20y experience on electronic dessign and embedded programming. Expert on STM32 processors (any CORTEX-M) and sensing I2C or SPI sensors using DMA transfers. Fites proposades $20 USD - Design system architecture. requires detailed specifications $200 USD - Design schematics $200 USD - Trace of PCB $300 USD - Firmware development $113 USD - Generate project documentation (doxygen) and validation (using AceUnit). Serveis addicionals oferits $1 USD - Expert on CE and FCC certification processes. And certification of electronic medical devices.
$833 USD en 30 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
A proposal has not yet been provided
$866 USD en 30 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I have a great experience with stm32F103 and stm32L152 using GCC C. Relevant Skills and Experience I have experienced with the building of firmware of stm32 boards using GCC C (Keil micro vision). Proposed Milestones $777 USD - base code of the firmware. Additional Services Offered $600 USD - C code without using library. please send me some detailed information about the firmware?
$777 USD en 20 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de UNITED STATES
Boston, United States
5,0
69
Forma de pago verificada
Miembro desde sept 1, 2006

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.