PCB layout and design for LED controller

Completado Publicado hace 2 años Pagado a la entrega
Completado Pagado a la entrega

Hello,

We are looking for a freelancer to help design a PCB board which controls an LED array. The LED array is external and is not included in this project.

We need the PCB schematic, layout, component selection and firmware. We will provide more detail and a basic flow diagram once a freelancer has been chosen and will work with you to help refine it.

Once this project is done, there will be further design work later so we ideally are looking for someone we can work with long term.

The device will have:

- a microcontroller

- WiFi / Bluetooth capabilities

- a microphone

- USB C connector (data and power)

- an electrical / data connector to connect between additional LED arrays

- Note that the LEDS are on a separate array and do not need to be included in the schematic/layout. This projct is just for the controller.

- the device will most likely use WS2812B LEDs. This will be confirmed shortly.

Physical dimensional contraints will be provided shortly after the project is underway.

The firmware will receive LED data packets from an external source and then send them to the LED array. The required code is only for the onboard controller. The code should be written in C++ and be testable on an Arduino.

We will be including an NDA in the project and we will provide more in depth detail to the selected freelancer. The ideal freelancer will be able to present examples of their work of similar complexity and should have a level of English good enough that they feel confident presenting and describing the work to two mechanical engineers.

We will work with you to come to an agreement on appropriate milestones and the project will be considered finalized once our manufacturer has reviewed and accepted the design.

Thank you for reading!

Diseño PCB Ingeniería eléctrica Microcontrolador Diseño de circuitos PCB Design and Layout

Nº del proyecto: #30533974

Sobre el proyecto

44 propuestas Proyecto remoto Activo hace 2 años

Adjudicado a:

(73 comentarios)
7.5

44 freelancers están ofertando un promedio de $499 por este trabajo

avigupta0061

Best PCB & Led Design Expert at your doorstep! Dear Client, We have lots of experience in PCB layout and design for LED controller so we able to do this project for you. We can provide PCB schematic, layout, component Más

$500 USD en 2 días
(60 comentarios)
7.8
kingch91

Greetings, I have read and understood your requirements, you need an engineer with "Electrical Engineering" background. I have an expert team of engineers and researchers who are excellent in power system circuit desig Más

$650 USD en 7 días
(171 comentarios)
6.8
amelectronics

Hello, I have experience in designing electronics circuits and can complete your project. I can also develop hardware compatible smartphone apps which can control hardware. I have all the hardware available to test and Más

$800 USD en 20 días
(72 comentarios)
7.2
Mauricio768

Dear Client. I have just read your job description and your project is really interesting to me. I have many experiences working for 12+ years with Circuit design, PCB design, manufacturing functional prototyping with Más

$500 USD en 7 días
(34 comentarios)
6.0
hayteekeys

Hello, I am PhD Researcher in Electrical Engineering with specialization in Control Systems (Linear and Nonlinear Control Systems). I have Master's degree in Electrical Engineering and Bachelor's Degree in Electronics Más

$300 USD en 3 días
(28 comentarios)
5.8
JunaidAhmad92

Hi, My name is Juanid. I am an experience electrical design engineer and have been design electronics control board from years. I can select components based on your requirements and also that will be in stock as due Más

$500 USD en 7 días
(40 comentarios)
5.9
engrhassanwali

Hi! I have understood your requirnment, about your project with every detail of it. I am an Electrical Engineer with more then 9 years experience in electronics, circuit design, PCB layout, microcontrollers, Arduino, Más

$750 USD en 10 días
(26 comentarios)
5.8
akashtho

Hello, thank you for your job posting. I have 15 years experience in PCB and circuit design and Manufacturing, Embedded programming, and i can help you with any kind of request in these fields. I will do my best to sat Más

$250 USD en 2 días
(9 comentarios)
5.8
doggar302

Hi! I am an Electronic engineer, PCB Layout, Circuit Design, microcontroller, STM32 microcontroller, C programming expert having past experiences with ,Altium, arduino, pic, AVR, chipkit and Texas instruments microcont Más

$500 USD en 7 días
(21 comentarios)
5.6
alilakho8

Hello dear project owner I am an Electronic engineer with experience in embedded systems designing and PCB designing i can do it in minimum time.

$500 USD en 2 días
(31 comentarios)
5.7
etalhak

Hello, I am an electronics and telecommunication engineer and I am quite experienced with hardware and embedded systems' design. So far I have designed many PCBs and I am experienced with EMI. I have checked your requi Más

$500 USD en 7 días
(53 comentarios)
5.6
Adeel2k14

I hope you are fine. I am a senior electronics engineer. I have rich knowledge of embedded system design and PCB designing. I have understood the project description, i am 100% sure i can complete your task. I will p Más

$250 USD en 7 días
(41 comentarios)
5.7
HarimohanG

FREE OF COST CONSULTATION Dear Client, I am an Electronic Engineer and I will provide PCB design and layout for LED controller with use of WS2812B LED and Schematic in a quality and timely manner. I have all ability wh Más

$400 USD en 2 días
(6 comentarios)
5.2
mzdesmag

Hi, I see that you need some assistant in I am expert and having 5 years of experience in simulations using MATLAB and SIMULINK in many fields including Electronics, Communication, Control System, Signal Processing and Más

$250 USD en 3 días
(14 comentarios)
5.2
ivanstroganov1

Hi I'm very glad to have an opportunity to help you with Arduino project. This job is very appealing to me because I have a lot of experience in PCB design and firmware development of various kinds of IoT devices usin Más

$500 USD en 7 días
(8 comentarios)
4.2
liupengtech1994

Hello! As an experienced Altium designer, I have over 5 years of experience in IoT device design. I read your requirements and I fully understand what you need. I think I can be your good choice since I have good expe Más

$500 USD en 7 días
(10 comentarios)
4.2
Mhmtkrt

Hello. I am interested in your project. Please send me a message so that we can discuss more. Thank you.

$500 USD en 15 días
(3 comentarios)
4.2
lydialin2000

1 ) I have over 20 years of experience in PCB Layout / Hardware / RF / EMI / Firmware designs. we can complete various design and layout requirements. # 8051 MCU / ARM Embedded system / Arduino / ST32Fx / IM6x / A Más

$600 USD en 7 días
(6 comentarios)
3.9
beraldoigor

Greetings, I am an electrical engineer with years of experience in hardware, firmware and software development for embedded systems and IoT, I can help you with the schematics, PCB layout and firmware development. As y Más

$750 USD en 7 días
(1 comentario)
1.5
silvacris25232

Hello, I'm Cristian, an electrical engineer with a strong PCB design background. I had the opportunity to design several types of LED strips, LED matrix flex PCB, and some other LED products. I prefer to use Altium Des Más

$500 USD en 7 días
(1 comentario)
1.0