Find Jobs
Hire Freelancers

ANSYS Workbench Simulation for Fiber Reinforced Concrete Slabs

$30-250 USD

Cerrado
Publicado hace alrededor de 1 año

$30-250 USD

Pagado a la entrega
There are 5 fiber reinforced concrete slabs on the ground in the attached paper as experimental works, and I need to simulate them via ANSYS to show stress, strain, ....etc. You should be able to involve the soil properties, such as sub-grade reaction modulus (k), and the fiber properties, such as type, length, aspect ratio of fiber, and all other fiber properties. Also, you should provide a detailed report and the video for all simulation process. Please check the paper below
ID del proyecto: 35872184

Información sobre el proyecto

25 propuestas
Proyecto remoto
Activo hace 1 año

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
25 freelancers están ofertando un promedio de $155 USD por este trabajo
Avatar del usuario
⭐⭐⭐⭐⭐ I am mechanical design engineer ⭐⭐⭐⭐⭐⭐ I have read your project description ⚡️I have expertise at statics,dynamics,mechanics of machines, mechanics of materials ⚡️ I can do CFD,CFX,ANSYS,FLUENT,SOLIDWORKS,SIMULATIONS You can contact me. I can complete the project within specified deadline.
$50 USD en 1 día
4,9 (266 comentarios)
7,0
7,0
Avatar del usuario
Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.
$250 USD en 7 días
4,8 (87 comentarios)
7,3
7,3
Avatar del usuario
Hi Thanks for reposting the project! I think we will able to complete your project successfully on this project window. I hope you create milestone so that I can start immediately. Best Reagrds
$120 USD en 4 días
4,8 (55 comentarios)
6,2
6,2
Avatar del usuario
Hello I am a Mechanical Engineer having expertise in mechanical designing, design analysis, 3D modeling and Analysis. product designing and material selection. I have done designing project related to robotics, automobiles, CFD and FEA analysis, aerospace and mechanical testing. I have done projects related to FEA analysis of shock absorber, composite design for blade, wheel rim optimization, weight reduction of leaf springs and side mirror analysis. I am excited about the opportunity to work on this project and am confident that I can deliver outstanding results. I would welcome the opportunity to discuss the project further with you and to learn more about your specific requirements. Please feel free to contact me at any time to discuss this opportunity further. Thank you for your time and consideration. Sincerely,
$140 USD en 7 días
4,9 (60 comentarios)
6,2
6,2
Avatar del usuario
Hello,  I have read Your project description ANSYS Workbench Simulation for Fiber Reinforced Concrete Slabs i have done many project-related engineering, Solid work, CAD/CAM, product designing, CFD & FEA simulation, design analysis, 3D modeling, and manufacturing of sheet metal and structural assemblies. show you my previous work similar with your requirements. so provide you unlimited changes and revision till you are satisfy. Design # Work On Time # Within Budget # Attention to customer requirements. Thanks..
$140 USD en 3 días
5,0 (23 comentarios)
5,5
5,5
Avatar del usuario
Hello there I can understand that you are looking for a validation of the experimental work with ANSYS simulation I can run stress and strain analysis using ANSYS Explicit Dynamics with the given dimensions and loading conditions in the experimental paper Please contact me on the chat so that I can start right away Best regrds
$140 USD en 3 días
5,0 (22 comentarios)
5,5
5,5
Avatar del usuario
Hello, I hope this message finds you well, Thanks for posting such an interesting project. I'm the exact type of contractor you are searching for. Having worked on similar projects for the past 10 years, I can handle tasks demanding the following skills; Engineering Solidworks Mechanical Engineering Finite Element Analysis Physics SEND a MESSAGE/CHAT, so that we discuss the details including budget and deadlines… If this project is no longer available please invite me to all your future projects. Data is the pollution problem of the information age, and protecting privacy is the environmental challenge. Regards, Emma A
$100 USD en 2 días
4,6 (21 comentarios)
5,2
5,2
Avatar del usuario
Hi I have read your description carefully. ⭐====I can Show you My Past Work========= I have rich experiences in PDF using ANSYS, Fibre reinforcement Concrete material, FEM, ABAQUS ⭐ I worked on many similar projects. I can guarantee the quality of the job. Please kindly message me. Thank you.
$50 USD en 3 días
5,0 (5 comentarios)
4,2
4,2
Avatar del usuario
Hi, I'm interested in your project, I'm a telecommunications engineer having more than ten years experience in Fiber optics. I'm well versed in ANSYS software. I believe I have everything it takes to complete your project. I'm looking forward to your reply.
$250 USD en 7 días
4,9 (10 comentarios)
4,5
4,5
Avatar del usuario
Hi there, I am Rashid. Hope you are doing great. Firstly about the ANSYS Workbench Simulation for Fiber Reinforced Concrete Slabs that I have a great experience in it. I am very confident to pull it off once awarded. I have good experience in Engineering, Mechanical Engineering, Physics, Solidworks and Finite Element Analysis. I am a Full stack developer with a team of experienced developers, You can check my profile that I have 100% completion rate on my projects. So it would be my pleasure to build long term relationship with you. All my skills are related to this particular project. Please let me know what is needed to secure the bid! Thanks for your consideration. Rashid Amjad.
$250 USD en 8 días
5,0 (1 comentario)
3,6
3,6
Avatar del usuario
Hello, I am a professional CAD CAM and CAE design engineer. I am expert in Ansys. I can help you in the simulation of concrete slab. I hope you contact me as soon as possible. thankyou regards
$30 USD en 2 días
4,2 (32 comentarios)
4,5
4,5
Avatar del usuario
I am perfect choice for this project because I am currently doing research for my project on Ansys so have strong grip on this software. Quality work will be provided on time. I am ready to start as soon as possible on your project.
$150 USD en 7 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hi i did a lot of works plus thesis plus research papers om these please check my portfolio i recently completed 47 projects in ANSYS master levels inbox me so that i can share more
$100 USD en 2 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I have done many project using ANSYS & Solidworks for design & simulation. As soon as you assigned the project I will complete the work at the earliest & reach back to you.
$40 USD en 4 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
I'll do this work , you can love my work you know I'm expert on this Okay Okay you must give me this work not for money just I'll do this work not for me okay ? Just for experience
$140 USD en 100 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hello Sir, I read you post about the need for fiber reinforced concrete simulation on Ansys, which I can provide you with it since I'm specialized in reinforced and fiber reinforced concrete applications and did a lot of validation models like this. Please look at my profile and looking forward to hearing from you Best Regards, Mohamed Gomaa, PhD
$500 USD en 7 días
0,0 (0 comentarios)
0,0
0,0

Sobre este cliente

Bandera de SAUDI ARABIA
Taif, Saudi Arabia
4,0
3
Forma de pago verificada
Miembro desde feb 20, 2021

Verificación del cliente

¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.