indoor greenhouse

Hello I have got your job posting “indoor greenhouse” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the Analog/Digital Electronics embedded systems(Arduino,Rasberry pi ,ARM processors ,PIC microcontrollers, ESP Wifi/Wireless boards,TFT Touch Displays,All types of sensors and actuators). i have done tons of similar projects So, I think you’ll find that, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio. I have all the components available here with me so I will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure. I will remotely guide you and help you build the system on your side. I am always available on Email and Skype. Please have a voice or video chat if necessary. I shall be available round the clock and able to start your project as soon as possible according to you. Thank you for your consideration, Best Regards, Haseeb Shafqat

I have more than 30 years of experience in electronics and programming As freelancer I have more than 200 projects with microcontrollers and RPi completed on different freelance stocks. To provide final price and timeline, and also to propose the best way to make your task I would like to clarify some questions. What model of fan controller you have used now? Would you like to use it on new setup or using of some external inexpencive sensors is possible? Can you please provide a brief but more detailed description of the system behavior? Should it to be accessible through web-interface indoor only? Do you need any alerts about critical conditions (like temperature or humidity out of safe range, or water tank is empty) to be sent? My bid is approximate at the moment. Please feel free to contact me in chat for discussion.

We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently within timeline. If you choose me, I think you won't regret. Best Regards.

Hi Please provide more information about setups i.e. what microcontrollers do you use and what type of irrigation pumps are there. I have worked on greenhouse and helped to digitalize aquaphonic farm so I can give you an insight to make RPi as master controller. Please ignore project delivery time and bid amount. They will be estimated after information is provided. Please discuss details over chat. Maximum response time is 8 hours, although mostly I respond in minutes. Thanks for your attention Archil

Greetings thanks for posting the project there i am electrical engineer i have expertise in embedded systems, PCB designing and circuit designing. I can work on latest engineering tools to complete your task. In my experience i have successfully completed many projects in the field of embedded systems and electronics. My major expertise includes. 1- firmware development of microcontroller and microprocessor. 2- PCB designing and Circuit designing. 3- Power electronics 4- IoT and automation 5- interfacing of sensor and actuators with microcontroller and microprocessor. I am sure you will consider me for this task when you look to my portfolio, I will provide you the best quality work as per your requirements at reasonable budget. You can trust on me; your satisfaction will be my priority. Looking forward at your earliest response. Best Regards Muhammad Adeel

Hey! This project sounds exciting! It could be a rocky road to finding a freelance electronics engineer who -That has the skills you need -And who is motivated to work closely with you, -And whom you can trust to get the job done right the first time. I intentionally target a smaller niche of projects with which I can work closely, so we get the exact results you’re looking for without struggling through every step. So if you're looking for a motivated, deadline-driven freelancer to take the weight of this project off your shoulders and work with you to get the job done right, let's chat! That way, we can hop on a strategy call to discuss your project further and ensure we’re a great fit. Looking forward -Abbas

Good day, I can help to design raspberry pie and run the entire system off of that with some programming for you in a quality and timely manner. I would like to have a thorough discussion on this project as there are certain suggestions from my side After dedicating more than 30 years to the electronics design and development, I am passionate in designing the best products Technology wise I have worked on all the latest technologies like GSM, 5G, Lora, Raspberry pieetc. And have worked on more than 20 design tools for designing and simulation purpose Some of the generic queries from my side are: 1. What is the application of this product? 2. What will be the ambient temperature of this product? 3. What are the mechanical constraints to be taken care of? If you are someone who wants to benefit from my experience just message me Hi and I shall be there for you Regards Hari Mohan

Hi there, How are you? I can work with your project skills Arduino, C Programming, C++ Programming, Microcontroller and Electronics. Upon reading your description file. I can definitely pull it off once provided with detailed file of your requirements. I have good experience in indoor greenhouse including Arduino, C Programming, C++ Programming, Microcontroller and Electronics. It would be great to have you on board and start it as quickly as possible. You can check my profile that I have 100% completion rate on my projects So it would be my pleasure to build long term relationship with you. All my skills are related to this particular project. Lets have a detailed chat about this project. Waiting from your end now. Thanks. Rashid Amjad.

Hi, i just read your project description and it sounds very interesting. I'm Hermann an electronic engineer with many year of experience, I have great experience building green house project with arduino and esp32 with many features, I use great algorithms like the PID controller to control the fans, you can check my youtube channel to see that. Please get to me inbox let's discuss the details of your project. Thanks.

Dear Sir, I would like to present myself as prospective candidate to do your project. I have sound knowledge and experience in Electronic and Programming . Therefore I would be the best candidate to do your project. I have read your project description. I think the use of Raspberry Pi is a one of best solution and for the rest of controls you could use I2C Relay module to on/off comports. RPi could host a web page with it the component could be use. Please message me to discuss further. Expecting a favorable reply, I remain, Isuru Athukorala

Hi! I am an Electronic engineer, PCB Layout, Circuit Design, microcontroller, STM32 microcontroller, C programming expert having past experiences with ,Altium, arduino, pic, AVR, chipkit and Texas instruments microcontrollers I am waiting for you over the chat. Thank you!

Lets start conversation.... Electrical/ElectronicsEngineering Hello, Dear Concern, We are a team of professional members of Electrical, Electronics, Telecommunication, Mechanical, Civil, Chemical, Aerospace, Avionics, Aeronautical, Thermal, Renewable Energy, and Industrial Engineering. We are also experts in the following software: Embedded system, spartan 3 and nexus A7 fpga, PCB DESIGNING, ARDUINO, ESP, Eagle, Altium, MATLAB, Simulink, PADS, PORTAL, Proteus, Cadence, Solidworks PCB, ANSYS, ABACUS, AUTOCAD, SPSS, STATA, PRO/E, CATIA V5, Stud pro, Homer Pro, We are trusted people and will never break your trust. We will deliver your work within your defined timeline. I assure you that your work will be error-free and 100% professional with high quality. We will never waste your time and money. We will try over best to make you proud. Please consider me for this job. Thank you in advance. Regards,

Hello, I am a mechatronic engineer, I have read your post carefully. I am a c++/c# and arduino, python expert with 4+ years experience. And I have a good experience in coding with Microcontrollers and Robotics. so i have developed a lots of apps similar to yours. I am sure I can meet it and complete it perfectly for you. I hope you discuss with me on chat. Looking forward to your response. Thanks.

Im an engineer and working on selling arduino modules. Your request got my attention as i have the best solution for you where you can control your entire system via internet . Hope we can discuss more so we'll understand eauch other better . Have a great day

Hi, I think this project is really nice. I'd enjoy working on it. I thought many times on doing something similar for myself. What plans do you have with the outcome? Do you plan to comercialize it? Or just use it for yourself? I'm an electronic engineer but work as a programmer since 2019, so I think its a good fit. It may take some more time than a week to finish it, but the time and money for me is not an issue. I just need good reviews to start rolling the wheele. Let me know if you have any more questions. Thanks!

I have a good knowledge of C, microcontroller, arduino and as have experience in working such projects.