MPLab PIC migration from a PIC with 28 pins to a PIC with 44

Completado Publicado hace 5 años Pagado a la entrega
Completado Pagado a la entrega

There is a PIC 16F1936 (28 pin SSOP) currently working on a PCB. We want to keep the PCB design (RC6 and RC7 excepted, as seen later) to a PIC with more pins: PIC 16F1939. Furthermore, we want to use three more pins for AD conversion as the current one.

The aim is doing the following implementations in MPLab:

Migrate from the PIC 16F1936 (28 pin SSOP) to the PIC 16F1939 (44 pin TQFP).

In the process, the pins that are now occupied: RC6 (/TX) and RC7(/RX) are not used for TX/RX. They have to be moved to other pins so the pins are usable as TX and RX in the PIC19F1939. This should be set in the PIC. They have to be set up so.

Finally, three new pins for ADC have to be set up.

New PIC datasheet, PIC 16F1939:

[login to view URL]

Current PIC datasheet, PIC 16F1936:

[login to view URL]

Ingeniería eléctrica Electrónica Software integrado Microcontrolador

Nº del proyecto: #17889609

Sobre el proyecto

20 propuestas Proyecto remoto Activo hace 5 años

Adjudicado a:

MUhammadt429i

I have long experience with 8-bit , 16-bit and 32-bit micro-controllers. I work with Microchip (PIC) , Atmel (AVR , SAM) , ST (STM) , TI (MSP) and NXP (LPC) micro-controllers. I use KEIL IDE , Atmel Studio , Code Compo Más

€34 EUR en 5 días
(41 comentarios)
6.0

20 freelancers están ofertando un promedio de €221 por este trabajo

ahmedmohamed85

Dear sir I have more than 10 years experience in embedded systems design, please check my profile, also please message me so that we can discuss Best regards

€155 EUR en 3 días
(269 comentarios)
7.5
seshupower

Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding fo Más

€555 EUR en 15 días
(60 comentarios)
6.7
JunaidAhmad92

Hi, My name is Junaid and I am an experienced PCB designer and PIC microcontrollers programmer. I will update your current PCB design to new design and will work with you in PCB testing phases. After completion of P Más

€155 EUR en 7 días
(41 comentarios)
5.8
Adrianopl

Dear Sir, I have good knowledge using 8 bits microcontroller from microchip, I often use MPLAB X and XC8, but I can work with CCS C or older hi-tech compiler if needed. If you have any question please let me know Más

€155 EUR en 10 días
(7 comentarios)
6.0
Mathilda33

Hi! consider this job done, I'm expert in PIC16 and PIC18, i'm also expert in using Mplab, can you please tell me which compiler you are using? is it hitech c compiler or some other? also do you want only schematic up Más

€250 EUR en 5 días
(38 comentarios)
5.9
cpp2048

I have worked quite a lot on Microchip products as well as PIC16F1936. I will migrate your existing codes to XC8 compiler and add the required part as you needed. Will be well managed codes. Long term assistance is ass Más

€233 EUR en 5 días
(44 comentarios)
6.0
mokule

Hi, I'm experienced programmer. I've used many of them from different families. Not exactly your models but it won't be a problem. My offer is an estimation. I'm reserving the right to change it or even withdraw afte Más

€100 EUR en 2 días
(5 comentarios)
4.5
engineeringexp

Master in Engineering, Electrical and Electronic Engineer, who is dynamic, reliable, resourceful, committed and organized with enthusiastic approach to succeed with a pleasant attitude. Possessing excellent analytical Más

€30 EUR en 3 días
(12 comentarios)
4.3
XiaoDongC

Hi. I’m developing electrical devices , embedded software and service programming. I have designed several devices and have a lot of experience with PIC,AVR microcontroller, ARM processors, Raspberry Pi, and Arduino Más

€50 EUR en 3 días
(5 comentarios)
3.2
ElectronicCarrot

Hi, I have worked extensively with PIC microcontrollers in the past. I even have a monthly column in Everyday Practical Electronics called PIC n MIX. The project sounds straightforward enough. Is there a specifi Más

€250 EUR en 7 días
(1 comentario)
2.1
dimitarmirchev

Hello Sir/Madam, I would like to apply for your project. I am an EE based in Bulgaria with several years of experience in schematics development and pcb design. I am using AD 17. You can check my portfolio with some Más

€200 EUR en 3 días
(2 comentarios)
1.9
sah59d520fac935c

i am good in microcontroller programing and have good knowledge of MP lab .i will give you work complete. I do many task related to MPLab and pic microcontroller before.

€1340 EUR en 5 días
(0 comentarios)
0.0
mcprogrammer

Hi! There is an issue with the project description: 1. "We want to keep the PCB design" 2. "Migrate from the PIC 16F1936 (28 pin SSOP) to the PIC 16F1939 (44 pin TQFP)." SSOP28 and TQFP44 packages are not pin-c Más

€100 EUR en 14 días
(0 comentarios)
0.0
almiron1118

saya meruapakan mahasiswa master jurusan instrumentasi, dan telah melakukan riset dan beberapa jurnal international

€55 EUR en 2 días
(0 comentarios)
0.0
yintp

I am very familiar with PIC microcontroller and I designed lots of projects based on PIC microcontrollers. Please contact me for details. Thanks Jim

€200 EUR en 3 días
(0 comentarios)
0.0