Find Jobs
Hire Freelancers

Help me finish my PCB design.

$30-250 USD

Terminado
Publicado hace alrededor de 5 años

$30-250 USD

Pagado a la entrega
We are a small team helping to develop a product that will be installed primarily on school busses to help deter people from passing a stopped bus. I have designed a simple circuit that provides 2 functions. 1. An alternating light flasher, this was done using 2 555 timers. 2. A motor control, Forward when the circuit is on, reverse when it turns off. The whole thing is pretty simple. and is currently functioning just fine in our lab. But thats the problem, it functions just fine in our lab, I need to ensure that this circuit (which has proven to be sensitive to voltage fluctuations) can operate correctly in the electrically noisy environment that is a school bus. So here is the scope of what were looking for; 1. Add whatever is necessary to the 12VDC input to ensure that the circuit is getting clean voltage. Again this will be installed in a school bus, so its a very noisy and fluctuating environment. 2. There is a relay that controls the direction of the motor output, I would like to add an adjustable boost converter before this relay so that the voltage to the motor can be increased so that we can adjust the speed of the motor. 3. The PCB traces that go to the lights and the motor must be sized to handle the load on them. 4. General cleanup of the routing to ease production costs. This should be a quick and simple project. I just don't have enough confidence in my limited knowledge of PCB design and circuits to put this out into the field as is. I currently have the design in PCB123 format so you will need to download a free copy from sunstone circuits in order to open the file. But the PCB123 file should contain all the components I have used in the current design except the relays which I included on the attachment, and the LEDS which are just standard through hole 12V LEDS. When all is said and done I would like to have the completed design either in PCB123 or regular gerber files with a schematic that I can send out for production. I also need a list of all the components used so that I know what to purchase when we go to assemble the boards.
ID del proyecto: 18524424

Información sobre el proyecto

13 propuestas
Proyecto remoto
Activo hace 5 años

¿Buscas ganar dinero?

Beneficios de presentar ofertas en Freelancer

Fija tu plazo y presupuesto
Cobra por tu trabajo
Describe tu propuesta
Es gratis registrarse y presentar ofertas en los trabajos
Adjudicado a:
Avatar del usuario
Hi Sr, I can design the board that you need. I will design the schematics circuits and in each component I will add the manufacturer part number and a description used by the PCB manufacturers for finding cheap options in stock. Once that I made the schematics and you validate this, I will make the PCB following your guidelines about size and shape. In the design process I will give you a 3D files for you can check the design, shape, labels, etc. Finally I will give you a complete package for you can send it to manufacture. (Gerbers, BOM, schematics, PDFs and Altium project files). The PCB will be designed using only two layers, big holes and maximum tolerance, for minimizing the PCB manufacturing costs. I'm electronic engineer with more than 15 years of experience designing circuits and PCB. For more references, please visit my portfolio. Any question, please feel free to contact me. Best regards Eng Juan M Garin
$194 USD en 3 días
5,0 (20 comentarios)
5,5
5,5
13 freelancers están ofertando un promedio de $143 USD por este trabajo
Avatar del usuario
.........................................................................................................................
$155 USD en 5 días
4,7 (37 comentarios)
6,5
6,5
Avatar del usuario
Hello sir. I am an electrical engineer best in pcb design and electronic circuit design. I have experience in pcb cad software that include the eagle cad, altium designer and kicad. I can help you with your design. I am sure that you will be satisfied by my work. Thanks.
$155 USD en 3 días
4,8 (26 comentarios)
4,5
4,5
Avatar del usuario
I am electrical engineer and recently made a similar project. I can design the pcb for you. Let me know if you are interested jn my proposal
$222 USD en 10 días
4,6 (20 comentarios)
4,8
4,8
Avatar del usuario
A Data Scientist with experience in Python, R programming, R Shiny, R studio and anything related to data science and python Master in Engineering, Electrical and Electronic Engineer, who is dynamic, reliable, resourceful, committed and organized with enthusiastic approach to succeed with a pleasant attitude. Possessing excellent analytical skill and good research background. I have successfully completed IELTS with an overall band of 7 and have a good proficiency in English 10 Years Experience in Data Science Data Visualization Power BI Tableau Business development Anything on R programming COMPLETED PROJECTS • FM radio. • VHDL Design of an Up/Down Counter. • Design of Up/Down Counter using PIC. • Duck Shooter Program using C. • Pointer movement controller on 2-dimentional axis using C. • LCD display Manipulation projects including: o Text Display o Volt-Meter • Analog to Digital Conversion (8-bit). • Sound to Light Color Organ Design and Development. • Minesweeper Player Creation using PIC. • Simulation of an End to End Communication System with MATLAB. • (BENG Individual Project) (MENG Part A). • (MENG Individual Project) (MENG Part B). • (MENG Group Project).
$30 USD en 3 días
4,7 (12 comentarios)
4,4
4,4
Avatar del usuario
Hello Sir, I have 4 years experience in PCB designing in EAGLE( single multilayer and flex). following are some examples of my work 1. ESP12E wifi + relay board + humidity&temp sensor Smart module 2. ESP12S wifi + relay board home automation board. 3. ESP12E wifi + RC522 RFID + BUCk converter module. 4. atmega328au + hm11(BLE)+ relays car actuator module. 5. atmega328au + nrf24l01 + relays smart switch module. 6. atmega328au + mpr121 capacitive touch smart remote. 7. amega328au + LCD display + hc06(later hm10) + amplifier + strain gauge water mapping module. 8. atmega328au + hm10(BLE) + gyroscope + reed sensor + battery charger smart skateboard module 9. Arduino Uno clone. I will provide you all necessary files ( gerber, smd-coordinate, BOM, Eagle(.brd& .sch) ). please, see my portfolio for more sample of my work. or initiate chat for more detail discussion on your project. thanks.
$150 USD en 5 días
4,9 (17 comentarios)
4,2
4,2
Avatar del usuario
I have 7 years experience on PCB design. Hope will work with you on this project. Thanks, Khanh Tran
$200 USD en 2 días
5,0 (3 comentarios)
1,7
1,7
Avatar del usuario
Hello, I am HW engineer in R&D department of one of the leading automotive company. I am ready to provide some changes to meet common requirements in automotive (I mean how to deal with noisily power)
$144 USD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hi. Thanks for your posting. I am an electronic engineer, having enough experience in IOT device, high speed circuit & PCB design. I am sure I can support you with my skills. Following is my skills and tools - Electrical & electronic diagram, and schematic & PCB design. • High circuit analysis and design such as DDR3, eMMC, 10Gbps Ethernet circuit • RF Antenna/Front end, filter. • Flexible PCB inlay design. design(Up to 12 layers PCB design). - Standardization and protocols • FCC, ISO/IEC 14443, ISO/IEC 18092, ISO 18000 • ISO IEC 7816, ISO/IEC 7815 - Firmware development for any MCU. • ARM Cortex Mxx, STM32xx, ATSAME70, AT91SAM, STC. • AVR: ATmega328, ATmega1280, ATmega2560, ATtiny43U, ATtiny85... • PIC: PIC16, 18, 24, 32 series • Raspberry Pi • Arduino series: arduino Uno, Mega2560 • Standalone RF module such as Nordic series, WiFi(ESP32, ESP8266) , BLE, Zigbee, Xbee Design Tools - Altium Designer 18, Cadsoft Eagle PADs, OrCAD - MPLAB X, Micro C, uKeil, STM32 workbench, AVR Studio. Arduino IDE - C, C++. I can give you a perfect project. Best Regards.
$200 USD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hi, I would love to work on your project. You can message me to discuss details about the design if you are interested.
$30 USD en 1 día
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hello! Would you like me to design your PCB? I got 12 years experience in designing PCB. You can pay me any amount. Thanks.
$30 USD en 5 días
0,0 (0 comentarios)
0,0
0,0
Avatar del usuario
Hi dear Sir/Madam I have MSc in electrical engineering. I have great experiences with the design circuit. I can do this job as well as possible. best regard
$200 USD en 3 días
0,0 (0 comentarios)
2,1
2,1

Sobre este cliente

Bandera de UNITED STATES
Ormond Beach, United States
5,0
2
Forma de pago verificada
Miembro desde ene 14, 2019

Verificación del cliente

Otros trabajos de este cliente

Modify Existing PCB Design
$30-250 USD
¡Gracias! Te hemos enviado un enlace para reclamar tu crédito gratuito.
Algo salió mal al enviar tu correo electrónico. Por favor, intenta de nuevo.
Usuarios registrados Total de empleos publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Cargando visualización previa
Permiso concedido para Geolocalización.
Tu sesión de acceso ha expirado y has sido desconectado. Por favor, inica sesión nuevamente.