Electrical Engineer - We need to transfer a circuit from HT- into SMD-layout.

En curso Publicado hace 5 años Pagado a la entrega
En curso Pagado a la entrega

Electrical Engineer - We need to transfer a circuit from HT- into SMD-layout.

The purpose of the circuit is to collect energy of a small photovoltaic module, which is indoor into a cap. The circuit powers a consumer, when an upper voltage limit of the cap is reached and switch it off, when a lower voltage limit is reached. The expected input currents are in the range of 30-1000µA. Voltage up to 10V. The expected output currents are in the range of 200-1000µA.

We developed and tested the circuit in classical HT-technology. We can provide the circuit in eagle format and/or pdf. We would also provide an recommendation/wish-list for most of the SMD-components. The circuit has a total of 10 electrical components. The size of the PCB would be limited to about 25x25mm².

We need the layout of the SMD-circuit in eagle format and we need all the necessary documents (e.g. BoM, …) and files to let the circuit be produced by the PCB-manufacturer of our choice. The output of this job should allow us to let the SMD-PCB be produce by [login to view URL] ([login to view URL]). We are open for further recommendations for the PCB-production, but [login to view URL] would be the reference. The time frame for this is 1 week (5 working days). The documentation has to be as complete, that we can proof it using eagle and use it to place the order directly at the manufacturer.

Diseño de circuitos Ingeniería eléctrica Electrónica Diseño PCB

Nº del proyecto: #18988432

Sobre el proyecto

23 propuestas Proyecto remoto Activo hace 5 años

23 freelancers están ofertando un promedio de €215 por este trabajo

BKTechnology

Hello, Hoping you are doing well. I checked carefully your requirements for this project. And I can help you all phases until you have the board in your hand. Let me introduce some information about us: We are a Más

€300 EUR en 4 días
(29 comentarios)
6.8
trailblazer42

Hello there, I have read your project description and I can help you with that. I'm quite familiar with eagle and I can provide you with all the documentation that you need. Also I can check out that manufacturer and l Más

€200 EUR en 5 días
(62 comentarios)
6.6
bijan01in

Hi I am interested to your project. I am familiar with electronics, microcontroller as well as PCB design by Eagle. Thanks.

€222 EUR en 5 días
(94 comentarios)
6.4
navernjaka

Hello. I am developing electronic devices for over 15 years.I have a lot of experience in change HT (component) PCB to SMD (minimize size). I make out the design documentation for the serial production of electronic Más

€150 EUR en 2 días
(23 comentarios)
6.3
vijay1307

Profile : ---------- over 15 years of experience in PCB layout design. Expertise in EDA layout tools Pads & Allegro. Over 6 years of experience in Ethernet related layout designs with Electrical interface, Opti Más

€150 EUR en 5 días
(38 comentarios)
6.0
abranch2

My name is Alvin Branch. I am a professional electrical engineer. I specialize in PCB layout/design, power electronics, AC/DC circuit design, and embedded system design. Please see my portfolio.

€305 EUR en 5 días
(2 comentarios)
5.9
ovaisiq

Hello. I am electronics design engineer and have experience designing PCBs using EagleCAD. I would like to do this conversion for you. Kindly have a look at my profile and let me know if you would be interested. Thank Más

€200 EUR en 10 días
(11 comentarios)
5.3
hari1406

Hi sir. I am a pcb designer having expertise in cad software which include the eagle cad, kicad, altium designer and circuit studio. I have the ability to convert the outdated circuits to updated footprints and maki Más

€200 EUR en 5 días
(26 comentarios)
4.5
prefectworld

Am full-time freelancer expert in Electrical & Electronic Circuit Designing & Simulation, PCB Designing, Consultancy of different types of Electrical & Electronic Problem. I am ready to give hardworking, reliability, f Más

€150 EUR en 2 días
(16 comentarios)
4.7
shivkantverma

i am interested to do your project. i will deliver it as you have mentioned . it would be my pleasure to work with you.

€300 EUR en 10 días
(11 comentarios)
4.4
arunprakaash6

Hello, I am Arun Prakaash, PCB Designer. I have 3 years Experience in designing. I can make PCB with smd components. I am using Altium Designer to design a PCB. I need Schematic Diagram to design a PCB with 3D mode Más

€150 EUR en 5 días
(15 comentarios)
4.6
mohameedtareq

Hello sir I'm Embedded system engineer with five years experience in electronics and electrical circuit design. I'll give you all required files according to Beta Features (Gerber files,Bom file,BRD file) I have Más

€266 EUR en 10 días
(18 comentarios)
5.1
intellisenseIN

Hi there, We can do it in 5 working days. Please do share the Schematic in eagle. Kindly spare 10 minutes for the interview. We are a professional team in Embedded hardware & software development. Please come for th Más

€305 EUR en 10 días
(3 comentarios)
4.0
volkantozan

I am an experienced BEng. Electrical and Electronics Engineer living in Cyprus. I am specialized in PCB design (EAGLE, Protheus, KiCad, Altium), Microcontrollers ESP8266, ESP32, Arduino, RaspberryPi. I have advanced kn Más

€190 EUR en 1 día
(8 comentarios)
3.7
Khanhbell

I have 7 years experience working on PCB layout. Hope will work with you on this project. Thanks, Khanh Tran

€250 EUR en 5 días
(3 comentarios)
1.7
hkayoub

Hi There, your need is my duty. I can finish your task, with professionalism. I'm expert in eagle and circuit design. you can see my profile.

€222 EUR en 3 días
(1 comentario)
1.0
IvanFER123

Hello! I am electronics engineer and I have a lot of experience with schematic and PCB design. I am using Eagle and KiCad for my projects and I can finish this job in maximum 3 days. If you have any questions, pleas Más

€166 EUR en 3 días
(1 comentario)
1.1
wpozada

Hello, I’m electronic engineer I have experience doing PCB layout on Altium, but I can make this layout on Eagle. Otherwise, I think that you want to transfer the circuit from THD technology to SMD, and also I would l Más

€333 EUR en 5 días
(0 comentarios)
0.0
christianpray

Hello there, I am a Hardware design engineer. I am very much familiar with pcb layout. I am working with QFN package, BGA package, SOT-23 package etc. I am new hear, give me a chance and i will give my 100% to deliver Más

€150 EUR en 4 días
(0 comentarios)
0.0
a18rhodes

Hi, I am a highly experienced hardware engineer with a Master's degree in electrical engineering. My thesis work was designing an all srlurface mount implantable wildlife datalogger. Relevant Skills and Experience In Más

€166 EUR en 5 días
(0 comentarios)
0.0