Maine engineering . AIM: Using drones and robots pre-decommissioning of contamination level in nuclear power plant.

Cerrado Publicado hace 2 años Pagado a la entrega
Cerrado Pagado a la entrega

OBJECTIVE:

Develop a guide for using drones and robots to assess nuclear contamination.

To provide the aims and objectives of the project, and briefly explain the rationale and methods employed if possible.)

5500 words

CARRY OUT RESEARCH IN

1. Remote radiation imaging system

UAV is equipped with a thermal camera. The captured thermal images provide a means to segregate water from oil given the disparity in the measured temperatures.

2. Image processing technique

Image acquisition

Image stitching

Image analysis

3. SOIL CONTAMINATIOM TEST

presented above test as carried out on Canadian badlands. Mobile platform was equipped with GPS, magnetometer and ambient sensors. We used a probe with temperature sensor DS18B20 and a moisture sensor

4. Radioactivity counter monitor: plastic scintillator EJ276 (Excellent physical hardness, Long-term stability of scintillation and optical characteristics)

5. Radionuclide identification system: Gamma spectroscopic scintillator with neutron detection capability (CLLB).

6. UAV architecture.

BRIEF DISCRIPTION:

Generally, during the pre-commissioning, radiation detecting devices are used by a human to detect the level of radiation in the nuclear plant by wearing a suit which resists the radiation. But, sometimes due to heavy radiation or the suit inability to resist certain radiation the suit fails to protect the human which is the great loss

In order to save lives instead of human we can use drones and robots as their replacement

Arial survey by drones used to detect how much area is contaminated around plant

Soil testing by advanced machinery also used to detect contamination

Air testing, water testing these all done by the robots

OUTCOMEs: saving life’s, accuracy, saves time, decrease of labour.

Electrónica Accelerator Physics Robótica Ingeniería eléctrica Ingeniería mecánica

Nº del proyecto: #30918599

Sobre el proyecto

4 propuestas Proyecto remoto Activo hace 2 años

4 freelancers están ofertando un promedio de ₹8917 por este trabajo

rainbow

I can do work on Using drones and robots pre-decommissioning of contamination level in nuclear power plant. Please send details of work

₹12000 INR en 7 días
(25 comentarios)
5.4
sbedi7160

hlo mdm/sir i have experienced of 3 years , uh can give ur work to me. i will submit it. thankyou

₹7000 INR en 7 días
(0 comentarios)
0.0
gunduzylmaz

I have written many reports and articles so far. Rest assured that we will create a good report for you. Just write a message.

₹10000 INR en 7 días
(0 comentarios)
0.0
robinabrahamra99

Dear Sir/Ma'am, I am an B1.2 aircraft engineer and have experience of working at an unmanned aerial vehicle company. I have my own blog page(cyberman) were I write articles. I have read your project and understood you Más

₹6667 INR en 5 días
(0 comentarios)
0.0